AMPLIFIERS > HIGH PERFORMANCE DUAL CHANNEL POWER AMPLIFIER > NX-5500

NX-5500

Maximum Output Power
Stereo (8Ω)	2x2500W
Stereo (4Ω)	2x4000W
Stereo (2Ω)	2x6000W
Bridge (8Ω)	8000W
Bridge (4Ω)	12000W
Rated Power (20~20kHz < 0.1%THD)
Stereo (8Ω)	2x1000W
Stereo (4Ω)	2x1600W
Stereo (2Ω)	2x2400W
Bridge (8Ω)	3200W
Bridge (4Ω)	4800W
Cross Tack	70dB
Frequency of Each Channel	20-20KHz
Low Pass Frequency	20-150Hz
High Pass Frequency	40Hz
THD + Noise @ 1KHz, 4:1	<0.035%
IMD 60Hz & 7Khz, 4:1	<0.04%
Signal to Noise Ratio	>105dB
Slew Rate (input filter limited)	40V/uS
Damping Factor 1Khz@8Ω	>400:1
Input Sensitivity	Selectable (0.77V/ 1.0V / 1.44V)
Input Impedance	10K ohm Balanced to ground
Input Connectors	Female XLR-3
Output Circuit Type	Class H
Output Connectors	4 Pole Speakon & Binding posts
Protections	Full short-circuit, Open-circuit, Thermal, Soft-start, DC voltage, Sub / Ultrasonic and RF
LED Indicators (per channel)	Power, Signal, IPC, Protect
Panel Controls	Front-2 input attenuators Rear- Ground lift, Mode Selection, compressor
Cooling	Front -to-back via 2 variable -speed fans
Power Supply Voltage	230V AC / 50Hz
Over Current protection (230V)	98-20A
Dimension (mm)	482 x 468 x 132
N Weight / G Weight (Kg)	33 / 36